| Body Material | : | Stainless Steel |
| Dimensions | : | 12-1/2 in W |
| Domestic/Import | : | Domestic |
| Media | : | Water |
| Nominal Size | : | 4 in |
| Pressure Rating | : | 175 psi |
| Series | : | RPLF 4A |
| Temperature Rating | : | 33 to 180 deg F |
| Type | : | Reduced Pressure |
| Warranty | : | 5 Years |
The Apollo® MODEL RPLF 4A Reduced Pressure Principle Backflow Preventers consist of two independently acting, TriForce™ center stem guided check valves with a differential pressure relief valve located between the check valves. The unit is designed to give maximum protection against backflow of health or non-health hazard fluids by either back-pressure or back siphonage. The durable domestic stainless steel units (2-1/2 to 8 in) and the FDA epoxy coated ductile iron units (10" and 12") are easily maintained in the line without any special tools. The TriForce™ check valves operate with a spring assist in the flowing condition to provide excellent flow rates which are documented by an independent laboratory.
Apollo™ Backflow Preventer, Reduced Pressure, Series: RPLF 4A, 4 in Nominal, 175 psi Pressure Rating, 33 to 180 deg F Temperature, Media: Water, Stainless Steel Body, 12-1/2 in W, Domestic
- Domestic stainless steel body: 2-1/2 in to 8 in
- FDA epoxy coated ductile iron body: 10 in and 12 in
- Easy maintenance: no special tools required
- Snap-in check retainers: 2-1/2 in to 6 in
- Bolted-in checks: 8 to 12 in
- Modular captured spring relief valve
- Low pressure loss as documented by an independent approval laboratory
- Center stem guided TriForce™ check valves
- Approved for horizontal flow
- Chloramine-resistant elastomers
- 304 stainless steel body
- Bronze/glass-filled ppo/SS check valves
- Stainless steel springs
- Chloramine-resistant silicone seat discs
- OS and Y flange x os and y flange