Oatey® FlowGuard Gold® All Weather CPVC Cement, 1-Step, 4 oz, Can, 0.3 lb Net Weight, For Use With: Cold and Hot Water Systems, Translucent Liquid, Yellow, Solvent, 470 g/L VOC, 14 to 23 deg F Flash, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, 0.94 Specific Gravity, 4 to 5 min Setting Time, 1 or 6 hr Curing, 0 to 110 deg F
For copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in diameter interference fit Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements May be used with out primer where local coders permit FlowGuard gold is a registered trademark of the Lubrizol Corporation Min 400 psi (2 hr at 73 deg F) hydrostatic burst strength Minimum 500 cps at 73 deg F +/- 2 deg F viscosity 7.98 +/- 0.2 lbs/gallon density 1 hr Cold/6 hr hot water above 60 deg F curing 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting
