| Applicable Materials | : | Copper/Tin/Zinc/Nickel/Sheet Lead |
| Capacity | : | 8 oz |
| Color | : | Tan/Gold to Black |
| Composition | : | 10 to 25% Zinc Chloride, 10 to 25% Ammonium Chloride, <10% Zinc Oxide, Tin, <1% Antimony |
| Container Type | : | Jar |
| Flammability Rating | : | 1 |
| Flash Point | : | >399 deg F |
| Form | : | Paste |
| Melting Range | : | 120 to 150 deg F |
| Odor/Scent | : | Petroleum |
| Series | : | 95/5 |
| Specific Gravity | : | 1.59 |
| VOC Content | : | 0 g/L |
| Warranty | : | Limited |
Nokorode® pre-tinning paste flux is a creamy-smooth paste specifically formulated with a small amount of 95/5 tin/antimony solder powder in the formula and a heat indicator. It is formulated to clean, pretin and flux the joint all at one time. Provides a fast, safe method of fluxing most common metals and solders. Excellent for use on larger diameters fittings or faster soldering's of smaller diameter fittings because it automatically tins before reaching higher temperature.
RectorSeal® NOKORODE® Pre-Tinning Paste Flux, Series: 95/5, 8 oz, Jar, 0 g/L VOC, Paste, Composition: 10 to 25% Zinc Chloride, 10 to 25% Ammonium Chloride, <10% Zinc Oxide, Tin, <1% Antimony, Tan/Gold to Black, Petroleum, >399 deg F Flash, 120 to 150 deg F Melting, Flammability: 1, 1.59 Specific Gravity, Applicable Materials: Copper/Tin/Zinc/Nickel/Sheet Lead
- Produces excellent, leak-free soldered joints
- Lead-free - formula is safe for use on potable systems
- Cleans, pre-tins and fluxes
- Great for large diameter fittings or faster soldering of small diameter fittings because it automatically tins before a high temperature is reached
- Cuts waste
- Very low scorching or burning
- Very low corrosive properties prevents pitting
- Very low spattering
- Excellent wetting ability allows solder to flow easily and uniformly into joints
- Smooth stable paste for easy brush on application
- Contains small amount of 95/5 solder powder
- 2 years minimum shelf life
- Wt/gal at 77 deg F: 8.44 +/- 0.5 lb/gal
- Do not use on magnesium or aluminum
- Recommended for 95/5 or 50/50 solder applications