| Domestic/Import | : | Domestic |
| Material | : | Stainless Steel |
| Nominal Size | : | 1/2 in |
| Series | : | 649 |
Sioux Chief's V-Sleeve stainless steel compression system is to be used to plumb any hot and cold potable plumbing application or radiant heat application. V-Sleeve is to be used with any SDR-9 PEX tubing and size specific ASTM F2159 or ASTM F1807 fitting. V-Sleeve's design shall allow for 360-degree compression over sealing barbs and 360-degree visual inspection of a properly inserted pipe. V-Sleeve's length and seal shall position sleeve compression directly over sealing barbs including the lead-in barb. V-Sleeve shall be F-877 certified.
Tomahawk PowerPEX® V-Sleeve™ V-Sleeve, Series: 649, 1/2 in Nominal, Stainless Steel, Domestic
- Visibility of tube fully inserted in sleeve and to tube stop on fitting
- V-Sleeves™ are to be used with ASTM F1807 and F2159 PEX fittings in conjunction with any SDR9 PEX tubing manufactured to the ASTM F876 or ASTM F877
- 360 deg visibility of crimped sleeve
- 360 deg compression on all sealing surface areas
- Sleeve can be pre-loaded onto fitting or tube
- "V" sleeve must be installed using a Sioux chief 305-8_TX compression tool
- Third party tested to ASTM F877, UPC listed
- Stainless steel PEX sleeve
- 0.595 in H
- 0.718 in width
- 0.64 in ID
- Proudly made in america